EASY MODULES TO START WITH

Helicopter Sweeper

Posted on 24/07/2020 by turbopolofr

The Helicopter Sweeper, created by Joel Sloan, is a cool compact sweeper Great Ball Contraption module, built using only the parts from the old Technic set 8068 “Rescue Helicopter”. Thanks […]

GBC 38 – Funky Ferris Wheel

Posted on 21/07/2020 by turbopolofr

You are looking for a big but simple GBC module that you can easily reproduce without spending weeks is gathering required bricks ? Then, the GBC38 – Funky Ferris Wheel […]

Geneva Drive

Posted on 14/06/2020 by turbopolofr

Here comes a real masterpiece! The Geneva Drive GBC module from Takanori Hashimoto is a fantastic Great Ball Contraption. The big six-arms wheel sitting at the middle of the building […]

Side Stepper

Posted on 30/05/2020 by turbopolofr

Are you looking for a tiny, colourful and compact GBC Module ? Then the Side Stepper module from PinWheel is there for you. Two sets of steps moving alternatively are […]

Single Stepper

Posted on 21/05/2020 by turbopolofr

The Great Ball Contraption Single Stepper from B@rt is a module which takes one’s time. The wheel at the top of this big tower is elevating and downing a plateform […]

Blizzard

Posted on 27/04/2020 by turbopolofr

A mini stepper, a mini wheel, a mini feeding ramp, everything is mini in the Blizzard GBC module from Dill I Am. But what is big, is the rotation speed […]

Pusher Upper

Posted on 24/04/2020 by turbopolofr

The Pusher Upper module from Huw Millington is a simple stepper that smoothly moves balls up the ramp like a funfair coin pusher. This GBC module comes along with a […]

Ball Bin Stepper

Posted on 19/04/2020 by turbopolofr

Super compact, easy to build, small but smart, horizontally-stackable to the infinite, these are some of the characteristics of the Ball Bin Stepper GBC module from Pinwheel. This Great Ball […]

Mini Elevator Module

Posted on 18/02/2020 by turbopolofr

Are you looking for a small GBC module, easy to build with kids, fun to watch and not using too many sophisticated bricks? The Mini Elevator module from Sam Friesen […]

GBC36 – Crazy Carnival is another very cool GBC module from PV-Productions. As with many modules from PV-Productions, this giant module is built using exclusively parts present within one official […]

GBC 37 Ratchet Ride

Posted on 19/12/2019 by turbopolofr

It is always nice to be able to reproduce a GBC module without having to go through a tedious search for all the LEGO parts needed to build it. The […]

Christmas Sweeper

Posted on 16/12/2019 by turbopolofr

Ho Ho Ho ! The Christmas Sweeper GBC module, created by Joel Sloan, is coming to town. This nice GBC module features a ramp that flexes and moves with the […]

Splat Gear Sweeper

Posted on 09/12/2019 by turbopolofr

Splat Gear Sweeper is a cute little GBC module from Stork. This compact GBC module is made with some colorful Splat Gears part and owns a simple mechanism: one bucket […]

Egg Process Machine

Posted on 06/11/2019 by turbopolofr

Even though football and basketball GBC balls are not as fragile as eggs, the Egg Process Machine module will take good care of them. Yasuhiko Kuramata, the designer of this […]

BananaGIG

Posted on 10/10/2019 by turbopolofr

BananaGIG is a new, custom GBC module by Ethan McCain. This module used the classic “banana gears” as the lift mechanism. This is a very simple module as it does […]

Basic Stairs

Posted on 24/08/2019 by turbopolofr

Yet another stepper module, but a very compact one, with recirculation and an amazing style!! The GBC module Basic Stairs from PG52 will astonish you thanks to his very clever […]

Dual ZigZag

Posted on 31/07/2019 by turbopolofr

I’m ready to bet that you’re gonna be amazed by the module Dual ZigZag from The Bananaman 2018. This tiny GBC module is using a mechanism never seen before. Your […]

Rotating Platform

Posted on 10/03/2019 by turbopolofr

The Rotating Platform module, created by Joel Sloan is inspired from a rotary dairy platform. Balls are taken up to the loading ramp by a simple conveyor. A flap lets […]

Rotor Lift

Posted on 18/02/2019 by turbopolofr

Conveyor modules are usually very popular in the world of Great Ball Contraption. With Rotor Lift GBC module, Stork offers us a different kind of conveyor made with a series […]

Stepper Module

Posted on 31/01/2019 by turbopolofr

If you’re looking for a very first GBC module to build with your kids, don’t miss GBC Stepper module from Sam Friesen. This compact module transports your favorite basketballs and […]

Port Factory

Posted on 27/01/2019 by turbopolofr

Port Factory is another brilliant GBC module in full loop from PV-Productions. The module is built using exclusively parts present within the official Lego Technic set “Ocean Explorer” (ref 42064). […]

Slide Scooper

Posted on 09/12/2018 by turbopolofr

Red team versus Blue team: who is going to catch the most of your favorite basketball and soccer balls ? With Slide Scooper GBC module, Stork provides us a funny […]

GBC Miniloop 07

Posted on 26/11/2018 by turbopolofr

GBC MiniLoop 07 is based around an original mechanism, designed by Josh DaVid, which swings around 180 degrees and picks up one ball at a time, then swings -180 degrees […]

Cradle Tipper

Posted on 18/11/2018 by turbopolofr

Cradle Tipper is an astonishing GBC module from Stork. This new comer on the GBC modules building scene is doing a remarkable usage of the “1/4 Circle Gear Rack” parts, […]

GBC Miniloop 06

Posted on 11/09/2018 by turbopolofr

This black and white checkerboard MiniLoop, made by Josh DaVid, is a large lifter which quickly lifts one ball at a time. This MiniLoop also includes a small basket that […]

GBC Miniloop 04

Posted on 28/08/2018 by turbopolofr

GBC MiniLoop 04 module from Josh DaVid uses rotating shafts to slowly lift the balls up a small incline. This model also includes a storage container for the balls. The […]

GBC Miniloop 05

Posted on 28/08/2018 by turbopolofr

GBC MiniLoop 05 module from Josh DaVid is certainly a unique Lego® GBC creation. The entire model is made up of four modules that can be disconnected and displayed as […]

GBC Miniloop 03

Posted on 20/08/2018 by turbopolofr

GBC MiniLoop 03 module from Josh DaVid is a simple catapult powered by rubber bands. A rotating cam, driven by motor or hand crank, slowly creates tension in the rubber […]

GBC Miniloop 02

Posted on 20/08/2018 by turbopolofr

The GBC MiniLoop 02 module from Josh DaVid is mainly based on the famous Archimedes Screw. This plastic spiral smoothly lifts the balls up and drops them back down a […]

Bidule à Balles

Posted on 21/03/2018 by turbopolofr

Bidule à Balles (“Ball Contraption” in English) is a compact and ultra-stylish GBC module from Hugolinvh. The module uses Bionicle teeth in a very clever manner to pick up your […]

GBC Miniloop 01

Posted on 09/03/2018 by turbopolofr

This Creation by Josh DaVid is one of the original GBC Miniloops. It is run using a hand winch or a motor and has a container on the side for […]

Railway System Reverse module V-type

Posted on 08/03/2018 by turbopolofr

With the module Railway System: Reverse module V-type, Akiyuki revisits one of his very first classics. Featuring a new ingenious forward/reverse system, the wagon from this GBC module will automatically […]

Cardan Lift Miniloop

Posted on 01/03/2018 by turbopolofr

Miniloop GBC modules are quite trendy these days. With Lifting Cup Miniloop, Sawyer engineers once again a GBC module you can easily reproduce, with simple but smart mechanism. Inspired from […]

Rampe Oscillante

Posted on 15/02/2018 by turbopolofr

With Rampe Oscillante, Tofe59 proposes us a nice long GBC module, easy to reproduce. The timing is crucial is this building: your favorite basketball and soccer balls only have the […]

GBC Module 15

Posted on 04/02/2018 by turbopolofr

GBC Module 15 from PV-Productions, also called “Dual Belt Lift Module”, is a giant module made with parts exclusively coming from “Technic Bucket Wheel Excavator” official set (ref. 42055). Balls […]

Fork Conveyor

Posted on 03/02/2018 by turbopolofr

Your favorite basketball and soccer balls will be like tightrope walkers with this awesome Fork Conveyor GBC module from Sawyer. Once elevated by a lifting arm and after a ride […]

GBC Wall mini Loop

Posted on 28/01/2018 by turbopolofr

Let’s Do This is a very productive and innovative Lego® builder usually proposing puzzles, magical tricks and many more buildings, based on your favourite bricks. GBC “Wall” miniloop is his […]

Lifting Cup Miniloop

Posted on 19/01/2018 by turbopolofr

Miniloop GBC modules are quite trendy these days. With Lifting Cup Miniloop, Sawyer engineers once again a GBC module you can easily reproduce, with simple but smart mechanism. Inspired from […]

Tri-Sep

Posted on 09/01/2018 by turbopolofr

Tri-Sep is an innovative GBC module from a Canadian builder called Great Ball Pit. Mainly made with common bricks, Tri-Sep is very stylish with its ultra-original vertical sweeper made with […]

Gears Galore

Posted on 02/07/2017 by turbopolofr

Gears Galore GBC module has a bunch of technic conical pieces on it that aren’t meshing with anything. All they do is push the balls through the module. You can […]

Rainbow Wave

Posted on 26/03/2017 by turbopolofr

Inspired by Akiyuki, Berthil Van Beek has designed this GBC module called Rainbow Wave. It has 38 colors and about 1150 moving parts. It is powered by a single motor, […]

ZigZag Stairs

Posted on 11/03/2017 by turbopolofr

This tiny module from Akiyuki is so cute! Made with a limited number of bricks, this GBC module is one of the first Akiyuki videos published on his channel and […]

Scissors Mechanism

Posted on 09/03/2017 by turbopolofr

Dawid Marasek’s Scissors Mechanism is a very simple yet smart miniloop GBC module. It can only carry five of your favorite balls at a time but relies on this exact […]

Steering Cup

Posted on 31/01/2017 by turbopolofr

You’ll love the awesome moves of Superfin619 Steering Cup module. Two cups rotating at the end of two rotating arms collect your favorite balls in some crazy moves. Definitely a […]

Long Conveyor Belt

Posted on 27/12/2016 by turbopolofr

With Long Conveyor Belt, Maico Arts offers you once again the opportunity to build a GBC module using only parts from a commercial set, just completing the set by a […]

Extended Belt Lift

Posted on 22/12/2016 by turbopolofr

Extended Belt Lift module from PV-Productions is entirely built using only parts from the official Lego® Technic Crawler Crane set (ref 42042) and uses 90% of all the pieces that […]

Archimedes Screw Type 1

Posted on 27/09/2016 by turbopolofr

Your favorite soccer and basket balls will run like hamsters in the “Archimedes Screw Type 1” module. Released in 2010, this module from Akiyuki has defined the foundations for a […]

Wheel Lift

Posted on 13/09/2016 by turbopolofr

With ALittleSlow’s Wheel Lift module, you have in front of you a real classic: a big rotating wheel collecting balls from a bucket and bringing them to the top of […]

GBC Lift Module

Posted on 02/09/2016 by turbopolofr

If you do own a couple of Lego® straight rail bricks, you should definitely build GBC Lift module from PV-Productions. After being elevated by an animated arm, your balls will […]

Serpentine

Posted on 24/08/2016 by turbopolofr

Your favorite soccer and basket balls follow a curvy path thanks to ALittleSlow’s Serpentine module. The path is just as narrow as required to force the balls to follow the […]

1 2 »